CE Authentication

[maccenterpc]

<sup>When I enter the service mode of a machine bizhub 1050 the correct procedure is: STOP, 0, 0, Stop, 0, 1.

But the equipment of EC asks me for password authentication. The password is 92729272 but was changed by
some person. I'm from Brazil and the equipment came from the U.S.. Detail, I can not enter the service mode.

The question would be.
It would have some form of reset the NVRAM? I've done in bizhub color, 253, 353, etc.. But in a 1050, what is the procedure?


Thank you for attention.</sup>

[JustManuals]

Re: CE Authentication

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

http://www.justmanuals.com

Paul@justmanuals.com

[rasman67]

Re: CE Authentication

Try 12345678 or 00000000 for the password.

[inutelkamo]

Re: CE Authentication

i dont know if it words..

Try upgrading firmware.. :0

[TheOwl]

Re: CE Authentication

Sometimes the password can be nothing at all.

[blazebusiness]

Re: CE Authentication

<sup>When I enter the service mode of a machine bizhub 1050 the correct procedure is: STOP, 0, 0, Stop, 0, 1.

But the equipment of EC asks me for password authentication. The password is 92729272 but was changed by
some person. I'm from Brazil and the equipment came from the U.S.. Detail, I can not enter the service mode.

The question would be.
It would have some form of reset the NVRAM? I've done in bizhub color, 253, 353, etc.. But in a 1050, what is the procedure?


Thank you for attention.</sup>

If you can't come up with the password ....you will have to replace nvram-----sorry to say.