PDA

View Full Version : BIZHUB 250P


Custom Search


ARTISER
01-03-2012, 11:42 AM
Good morning, TO SEE IF YOU CAN HELP ME THAT HE HAS THE PROBLEM ARISE.
I ordered UNIT CHANGE IMAGE COULD NOT SEND ANY FILE TO PRINT, AS WAS LOCKED, YOU HAVE CHANGED THE CHIPS UNITS, took off on the display, BUT THEN GETS READY TO PRINT.
PLACES TO SEND A FILE ERROR C-FD07, THIS IS NOT ERROR, PLEASE TURN ON THE MACHINE AND DOES NOT SEEM TO NORMAL HEATING CYCLE AS THOSE SECONDS BEFORE AND STAYS IN PRINT LIST, BUT AT THE ENVA FILE, return error, and I have no way of knowing what is.
THANKS AND HAPPY NEW YEAR

JustManuals
01-03-2012, 07:07 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

ARTISER
01-04-2012, 04:18 PM
THANK THE MANUAL OF SERVICE AND HAVE
PUT IN THE MANUAL IS A ERROR
ASIC10 TIMEOUT NUMBER OF DMA

thanns teh manual of service and have
put in the manual is a error

ASIC10 TIMEOUT NUMBER OF DMA UNDER OPERATION AND TRANSFER COMPLETION
LINE=0 DMA_D

rank c (on off switch power)

I need is how to interpret the error code, do not know what that means, do not understand the problem.

if I send a file to print, after a while after giving the code again

ARTISER
01-04-2012, 04:56 PM
OK THANK YOU FOR ALL
The mistake has been solved
A configuration problem IN THE SERVICE MODE
Thanks and happy NEW YEAR

Custom Search