Rustmeister
01-06-2012, 07:52 PM
So, I have this FS 110 with a stapler problem. It will leave marks where the staples were supposed to be, but no staples. I have seen a bent staple on the cartridge after I remove it, and if I try to get it to staple two sets, two staples are on the cartridge. Haven't gone past two, for fear of further issues.
I've verified the staples are the correct ones, and replaced the cartridges with no luck.
From what I've read it may be a staple issue, but I'd like to hear other ideas before I go farming through packs of staples checking to see if that's the case.
Thanks in advance,
Rusty
I've verified the staples are the correct ones, and replaced the cartridges with no luck.
From what I've read it may be a staple issue, but I'd like to hear other ideas before I go farming through packs of staples checking to see if that's the case.
Thanks in advance,
Rusty