View Full Version : KONICA MINOLTA C500

Custom Search

01-08-2012, 05:40 PM
I am working on two c500's . The first one has an external fiery hanging off the back of the machine that uses two pig tails to connect it to the machine. I can print to that one.

The second one has a fiery that is built into the back of the machine. I am using window 7 opperating system. I can not seem to connect to that machine. Can anyone tell me what drivers i need to download to connect to that machine? What is different from the other machine that is keeping me from printing?
Networking is not my thing. Thanks.

01-08-2012, 08:36 PM


No w7 driver available...try a Vista driver and good luck

01-09-2012, 01:14 AM
I installed the driver. I can ping the printer. I can get in with explorer. It will not print. I'm doing something wrong. It must be windows 7.
Any ideas?

01-09-2012, 07:07 AM
Try it first with an older system,
This is easiest way to see how and what next.
Also see whether the network cable into the right port.
I knew I had to cheat and plug the cable into the connector of the printer instead of a Fiery.

01-12-2012, 02:23 AM
Could be they both had the external Fiery at one time. Make sure the controller type is set correctly. Don't remember which one it is (1 through 5) but I woud look there.

Custom Search