Fiery dont look the finiser

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tasosquesta
    Technician
    • Jan 2012
    • 11
    #1

    Fiery dont look the finiser

    I have bizbub c6500 and my fiery dont look the finisher. Please help me
    Tags: None
    • Coptech
      worker drone
      250+ Posts
      • Dec 2009
      • 460
      #2
      Re: Fiery dont look the finiser

      Have you checked it as an installed option in Command Workstation?

        Comment

        • tasosquesta
          Technician
          • Jan 2012
          • 11
          #3
          Re: Fiery dont look the finiser

          yes. look only the paper tray. The copier operating normally. but by the pc will not print because dont sees finiser. sorry for Spelling me.

            Comment

            • RRodgers
              Service Manager
              1,000+ Posts
              • Jun 2009
              • 1950
              #4
              Re: Fiery dont look the finiser

              Originally posted by tasosquesta
              yes. look only the paper tray. The copier operating normally. but by the pc will not print because dont sees finiser. sorry for Spelling me.
              Oh it wel prnt witout da finiser select in da drier.

              How did you install the driver?
              Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                Comment

                • tasosquesta
                  Technician
                  • Jan 2012
                  • 11
                  #5
                  Re: Fiery dont look the finiser

                  What is right; My problem is in fitting in the hardware or a software ?

                    Comment

                    • emujo
                      Field Supervisor
                      2,500+ Posts
                      • Jun 2009
                      • 3009
                      #6
                      Re: Fiery dont look the finiser

                      Ouya Musta onfigureca the optionsa enwhy uuya installa he drivera. Emujo
                      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                        Comment

                        • tasosquesta
                          Technician
                          • Jan 2012
                          • 11
                          #7
                          Re: Fiery dont look the finiser

                          do not understand you. Im from greece. Please help me

                            Comment

                            • emujo
                              Field Supervisor
                              2,500+ Posts
                              • Jun 2009
                              • 3009
                              #8
                              Re: Fiery dont look the finiser

                              Originally posted by tasosquesta
                              do not understand you. Im from greece. Please help me
                              Trying to be funny....When you install the Fiery Driver (unlike the standard Emperon) you must choose the options that are installed on the MFP the 1st time you open the driver. There is an "AUTO UPDATE" check box, but you still must do this. If the auto retrieval fails, then you have some other issue that a production tech may be able to help with. If this is a new MFP, why isn't the dealer that sold you this assisting you? Emujo
                              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                                Comment

                                Previous template Next
                                Working...