PDA

View Full Version : Bizhub C650 - PRCB - Where can I get one? For a good price?


Custom Search


angelbinky
01-11-2012, 01:43 PM
Anyone have any ideas about where I might be able to purchase the PRCB (printer control board)for a Bizhub C650? or one that is compatible?

Evidently, the "fuser" unit burnt it out. At least that's what the "tech" said..... could it?

Or, perhaps a used one??
I'm desperate.
Thanks a bunch. You guys are the best.

Mooseface2r
01-11-2012, 08:14 PM
What country are you in?

EarthKmTech
01-11-2012, 09:41 PM
prcb boards on all km machines im aware of have icp's (surface mount fuses) on all outputs to motors, solenoids, clutches etc.

they can be repaired if its simply a blown icp, though most people simply throw them in the bin. If its not simply a blown icp, then the board is definitely a bin job.

if the value of the blown icp can be determined replacement by an experienced electrical service person should only cost under $100 (the same people who used to repair tv's etc before they became disposable items too) You just need to tell them exactly where on the board it is and what to replace it with if your not a confident solderer.

mitchl
01-17-2012, 08:00 PM
Depending on where your at these guys can help you out www.hytecrepair.com/ They can take care of most all of your board repairs.

Custom Search