bh 211 light copy

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • abbas saeed
    Technician
    • Mar 2010
    • 31

    bh 211 light copy

    How are you

    I have a bh 211 , I replace (dr114) and (dv110) but after that , copy light
    Before changing the (dr114)and (dv110) the copy was good except for some lines



    help me


    thank you
  • Darren King
    copiertech
    500+ Posts
    • Jul 2007
    • 652

    #2
    Re: bh 211 light copy

    Did you run an F8 after replacing dev? Also reset supplies life counter.
    Hope this helps.
    Darren

    Comment

    • mrwho
      Major Asshole!
      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 4297

      #3
      Re: bh 211 light copy

      Also check the following:

      - If you did take out the corona unit, make sure it is correctly placed. It is possible to close the IU with the corona in the wrong position;
      - Make sure the drum is properly grounded. I once stuck a screwdriver at the backside of the drum flange in order to keep it in position while rotating it by hand, and misplaced the ground conductor inside the drum by doing it.
      ' "But the salesman said . . ." The salesman's an asshole!'
      Mascan42

      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

      Ibid

      I'm just an ex-tech lurking around and spreading disinformation!

      Comment

      • abbas saeed
        Technician
        • Mar 2010
        • 31

        #4
        Re: bh 211 light copy

        Thank you my brothers and I will try to find a solution that gave me

        Comment

        • abbas saeed
          Technician
          • Mar 2010
          • 31

          #5
          Re: bh 211 light copy

          I have found the solution
          There was a problem
          Installation

          Thank you

          Comment

          Working...