PDA

View Full Version : Factory reset Konica Minolta c252


Custom Search


Lasersupplies
01-12-2012, 10:08 PM
Hi guys, ive recently come into contact with a few c252. Does anyone know how to do the cold/factory reset on this device?

Thanks in advance.

EarthKmTech
01-12-2012, 10:32 PM
you can completely reset the machine back to factory in service mode using data clear, but its a lot of work to set it up again properly, you will still need to format the hard drive.

personally, i would just format the hard drive, reset the nic settings and then clear anything else from the web interface in admin mode if the machine is to be resold - this is what I used to do.

JustManuals
01-13-2012, 01:05 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

Custom Search