View Full Version : Factory reset Konica Minolta c252
Lasersupplies
01-12-2012, 09:08 PM
Hi guys, ive recently come into contact with a few c252. Does anyone know how to do the cold/factory reset on this device?
Thanks in advance.
EarthKmTech
01-12-2012, 09:32 PM
you can completely reset the machine back to factory in service mode using data clear, but its a lot of work to set it up again properly, you will still need to format the hard drive.
personally, i would just format the hard drive, reset the nic settings and then clear anything else from the web interface in admin mode if the machine is to be resold - this is what I used to do.
JustManuals
01-13-2012, 12:05 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.