C452 Fixing problem with Thick paper (250 gr.)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Laserbeam
    Trusted Tech

    100+ Posts
    • Aug 2011
    • 152
    #1

    [CQ] C452 Fixing problem with Thick paper (250 gr.)

    Attached Files
    Tags: None
    • blazebusiness
      SanDiegoCopierRepair.com

      Site Contributor
      1,000+ Posts
      • Apr 2010
      • 1250
      #2
      Re: C452 Fixing problem with Thick paper (250 gr.)

      Media_Guide_Consumer_Web.pdf

      Have you reviewed the Konica Minolta media guide for that model? Attatching a copy for you. It shows what paper will work with that unit. I would consider that as a possible cause before replacing the fuser.
      sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

        Comment

        • mo0651
          Service Manager

          1,000+ Posts
          • Apr 2009
          • 1054
          #3
          Re: C452 Fixing problem with Thick paper (250 gr.)

          Are the fuser rollers showing buildup?

            Comment

            • emujo
              Field Supervisor

              2,500+ Posts
              • Jun 2009
              • 3009
              #4
              Re: C452 Fixing problem with Thick paper (250 gr.)

              Had a similar problem, similar CQ..cust was leaving trays set at thick 3 settings just to save time, and running predominatly plain (20#). After 500-1k copies, melted toner was thrown over every componant in the fuser, you could see the build up dripping down and contacting the fuser rollers. Your paper, according to the media guide, is in specs and can be run from any tray or bypass at thick 3 setting. Emujo
              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                Comment

                Previous template Next
                Working...