PDA

View Full Version : Konica Minolta Bizhub Pro 920


Custom Search


galen
01-16-2012, 10:42 PM
Have a konica minolta bizhub pro 920 that gets an intermittent Z fold at the registration roller or no registration roller drive at all. M2 registration roller or relay roller. Need to know if anyone has ran into this before? Is this a usual problem with this machine?:confused:

mo0651
01-16-2012, 10:48 PM
What is the jam code? how many copies on it? Z folds are usually caused by faulty clutches, but there are other factors. A little more info will help you get to the bottom of the problem faster.:cool:

JustManuals
01-17-2012, 05:07 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

galen
01-17-2012, 02:32 PM
The machine has about 900K and the problem is intermittent. Sometimes it will Z fold but go through to finisher without jamming,it might Z fold up like an accordion and stop or it may run 20 or 30 without any problems.

mo0651
01-17-2012, 02:58 PM
Jamming at registration or at finisher????? Go look at jam codes and get back to us.:confused:

Custom Search