Minolta Di350, Co650 error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • legaspiclg
    Technician

    50+ Posts
    • Oct 2011
    • 72

    #1

    [Error Code] Minolta Di350, Co650 error

    Hello,
    Please help on my Minolta Di350 which has a code that appear Co650, i really dont know what is this. Sometimes i can copy 1 or 2 copies but after this Co650 always appearing.
    Please help.
    Thank you very much in advance.
    Cesar
  • fixthecopier
    ALIEN OVERLORD

    2,500+ Posts
    • Apr 2008
    • 4714

    #2
    Re: Minolta Di350, Co650 error

    That code is for scanner home position. Check to see if anything is preventing the scanner from moving to home position.
    The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

    Comment

    • Tec1
      Technician
      • Dec 2011
      • 48

      #3
      Re: Minolta Di350, Co650 error

      check foil on exposure lamp
      if foil has split in it repair or replace lamp

      Comment

      • legaspiclg
        Technician

        50+ Posts
        • Oct 2011
        • 72

        #4
        Re: Minolta Di350, Co650 error

        Hi Mr. Fixthecopier,
        Good morning, thank you very much i did it, i replaced the home position sensor, and now the machine is up & running, , but i have two machines that has a codes if you can help me again, first is my Konica 7022, it was indicating, f26-3, and the other one is Minolta Di183 it is indicating COF32, Please help me again.
        Thank you very much and may God Bless.
        Regards,
        Cesar

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838

          #5
          Re: Minolta Di350, Co650 error

          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

          Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

          Paul@justmanuals.com

          Comment

          Working...