C6500 with PF-601 - Skew on 300g

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299
    #1

    [Misc] C6500 with PF-601 - Skew on 300g

    I've got a machine that started with 3mm skew on 300g. I managed to lower it to 1mm skew. I know that falls inside machine specs, but I'd like to try to lower that difference, but no matter what I do, it never falls bellow 1mm.

    Suggestions accepted!
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!
    Tags: None
    • richd
      Technician
      • Aug 2009
      • 49
      #2
      If you have a Fiery, try setting up the tray alignment, however 1mm skew on 300 gsm isnt bad ....... good luck !!

        Comment

        Previous template Next
        Working...