remati
02-02-2012, 10:23 PM
hello people
Sometimes when asked to staple and center fold ,the machine an block and the motor M29 stays continuously working... to stop it, we must open the door of the FS 529 this problem only happens in A3 and the paper stays in the SD stacker ,and must be removed by hand....
If we do the same work in A4R goes well...
any help ??
many thanks
Sometimes when asked to staple and center fold ,the machine an block and the motor M29 stays continuously working... to stop it, we must open the door of the FS 529 this problem only happens in A3 and the paper stays in the SD stacker ,and must be removed by hand....
If we do the same work in A4R goes well...
any help ??
many thanks