PDA

View Full Version : Set TSI on Bizhub 250


Custom Search


jrf
02-10-2012, 12:14 AM
Hi All
This machine displays this message when I scan to email (Please set TSI) if I select menu and TSI the scan will go through but it's a nuisance everytime, any ideas please ?

ni311
02-10-2012, 03:45 PM
To register transmission sources
1 In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
– For the procedure to log on to Administrator mode, refer to “Logging
on to Administrator mode” on page 8-9.
2 Click [TSI Registration].
3 Enter the transmission source name, and then click [Apply].
– Up to 8 transmission source names can be registered.
– Up to 40 characters can be entered.

Custom Search