View Full Version : C500 Toner recovery box
Cosminake
02-13-2012, 10:38 AM
Hi,
My Bizhub Pro C500 displays this message: "Please set toner recovery box and close the door".
But I don't have the door for the toner recovery box. What improvisation should I make to get rid of this message?
I attached a picture
Thank you very much!
Cosminake
02-13-2012, 10:53 AM
Problem solved.
I pulled a paper into the door closing sensor.
Now it's telling me to add yellow toner.
The Y toner is full, I changed 2 bottles but the message is still there.
What can I do?
Cosminake
02-13-2012, 03:47 PM
Solved this problem too.
The toner sensor was blocked. Cleaned up there and everything is allright.
mrwho
02-13-2012, 07:05 PM
You're my favourite kind of customer. :)
Cosminake
02-13-2012, 07:11 PM
Thank you mrwho :)
After the problem with yellow toner, appeared SC45-20.
Gues what? I solved it too :)
Cleared the PS8 and PS9 sensors.
I will come back tomorrow if I will discover more problems.
Ianizer
02-15-2012, 11:29 PM
Sounds like somebody just picked up a pig. ;)
-I
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.