PDA

View Full Version : Error Code bizhub 750 web solenoid


Custom Search


waqar2211
02-20-2012, 07:27 PM
my bizhub 750 web supply solenoied is nt workind during copies ,i have check it manualy then from switchs its working can anybody tell me how to turn it on from switch setting

JustManuals
02-20-2012, 08:05 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

EarthKmTech
02-20-2012, 09:32 PM
make sure the web counter hasn't exceeded 375k.

reset to zero, and restart the machine at the MAIN switch and try again, if you are an end user and not a technician this conversation ends now.

waqar2211
02-20-2012, 10:33 PM
make sure the web counter hasn't exceeded 375k.

reset to zero, and restart the machine at the MAIN switch and try again, if you are an end user and not a technician this conversation ends now.



i am a technician ,web is new cant understand i dnt have the service manual ineed to know the switch setting i think so its off from the switches coz when i go to main programe and check the signal its working but during copies it wont

suomi
02-21-2012, 07:17 AM
service mode>parts life >web life>>reset. Happen to me once...

emujo
02-21-2012, 03:08 PM
Ditto, if the web has reached its life (life counter) it will not advance during copy cycle..Will work in test mode..sounds like you forgot to reset the counter. Emujo

waqar2211
02-21-2012, 07:03 PM
service mode>parts life >web life>>reset. Happen to me once...
thank you it worked for me

waqar2211
02-21-2012, 07:04 PM
Ditto, if the web has reached its life (life counter) it will not advance during copy cycle..Will work in test mode..sounds like you forgot to reset the counter. Emujo
thank you dude

Custom Search