View Full Version : Fiery in Konica 7040

Custom Search

11-13-2007, 03:36 AM
Y have been working with a Konica 7040 with Fiery X2E.It had a hard disk 2 GB.I bought a 80 GB Hd.When I mark:FORMAT ,receive ERROR formatting drive.What file sistem and partition must I use in my computer ?.I used Fat 16 and fat32.Thanks.Carlos from Argentina.

11-13-2007, 05:08 AM
Not 100% sure but I think you will have to clip this drive to 20GB as the controller may not be able to see a drive of that size. The drive will format itself while you install the system software.

11-14-2007, 02:27 AM
Ramdon:How can I clip a notebook disk 80 Gb to 20 gb? Thanks.Cadurandeu.
Thanks for your help.

11-14-2007, 03:30 AM
Check with hard drive manufacturer spec sheet to determine if the model can be capacity limited. On the FIERY X2w I believe that the hard drive must be strapped to limit capacity to 30 gb in order to conform to Windows constraints. Limit capacity before attampting Format and System loading.


11-14-2007, 08:12 AM
copyguy is right. The website of the manufacturer should provide clipping tools. Samsung drives can be clipped and are reliable.

Custom Search