PDA

View Full Version : Lexmark E260dn jamming


Custom Search


dbrownlee
02-22-2012, 02:10 PM
hoping somebody may have seen this before I pitch it in the trash... ONLY on duplex print jobs, and the same way every time, the last page of the job ccomes out to the exit tray to be reversed bacck for printing the 2nd side, it comes completely out on the exit tray, there is another sheet (blank) with about 1-2" coming out of exit rollers, and a blank sheet undrer the drum, with just the lead edge in the fuser nip. Again only on duplex jobs, and only on the last sheet. Machine is clean, new feed rollers, have swapped drum and toner carts just to see. Single side jobs run perfectly all day. Hytech and Partsnow tech support no help on this one. Any suggestions? Thanks, Dave.

JustManuals
02-22-2012, 10:31 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

dbrownlee
02-23-2012, 03:40 PM
Thanks, Paul.
I thought I checked your site and didn't see it. I'll head there now.
Dave

trc
02-24-2012, 01:26 PM
Check paper feed clutch

forpaxe
02-28-2012, 03:47 PM
Check paper feed clutch

X2

Custom Search