Minolta di 350(abort code)

[legaspiclg]

Hi,
I have a Minolta Di350, i have 2 problems at the moment:
The first is; there was a message on the screen after i turned on the machine, the message was this:
CODE - OXOD102B5
TSKID- OX000055FO
SP=OX90176825
RA=OX9F86FAAO
BUILD=0251C.990723
If this message appears on the screen the screen will reset to its previuos state and the screen would leave blank and the message keeps coming back.

The second problem was: it has uneven copies, half of the copy is light on the rear side, and half of the copy is very good on the front side.
Please help as i really don't know what i am going to do.
Cesar

[JustManuals]

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

[fixthecopier]

Most abort codes lead to the mfb, and the image problem is probably related to the IU.

[copiman]

When I used to work on the Di200, 250, and 350 series, this was a problem. There are bulletins on this. Maybe a Minolta tech has access to them and might share them with you. Wished I could remember. Snorted too much toner over the years.