View Full Version : Miscellaneous Minolta di 350 UNEVEN COPIES
legaspiclg
02-26-2012, 03:26 AM
Good day to everybody, i have a Minolta Di 350 producing uneven copies, the print at the rear side is producing light copies, and on the front side it produces good copy quality.
Please help of how to adjust the correct settings, the imaging unit is new, a replaced the old imaging unit thinking that the problem came from the imaging unit, but when i replaced the IU the same problem occurs.
Many thanks.
Cesar
JustManuals
02-26-2012, 07:26 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Hansoon
02-26-2012, 10:45 AM
If it happens also with internal printouts than it could be the laser slit glass being foggy.
Hans
legaspiclg
02-28-2012, 12:40 PM
hANS,
Thank you very much for the info. I will try to locate where is that laser slit. Really i am not familiar with this machine as i have no service manual.
Anyway, thank you very much once again.
Cesar
Hansoon
02-28-2012, 12:49 PM
http://img263.imageshack.us/img263/2030/shutterrip.jpg
Hans
Hansoon
02-28-2012, 12:53 PM
http://img263.imageshack.us/img263/2030/shutterrip.jpg
Hans
Joe Foe from Buffalo
02-28-2012, 04:10 PM
Google service manual/parts for machine and you will find it for free. I would also do a zoom up and down to find out if it is in optics. Sound like a bad roller in paper transport or dev. unit though.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.