View Full Version : C450 scan to file
akbareshghi
02-27-2012, 04:43 PM
i want to setup Sending Data to a PC on the Network (Scan to SMB) in windows 7 please guide me
thanks
luis8832
02-27-2012, 05:18 PM
You can use ftp utility for the scan to file. Log into konica minolta website they have the software and the guide on how to set up, they also have a guide on how to set up scanning with windows 7.
TheOwl
02-27-2012, 09:37 PM
With Scan to SMB, you will first of all need the following:
1. A username and password for the machine to use on the PC
2. A shared folder on the PC
3. You must have File Sharing enabled in Windows
4. You must be either connected to a "Home" or "Work" network, not a "Public" network (can be seen by going to the Network and Sharing Center)
Once you have that, you can then enter in a one touch button on the machine by going to the machines web interface (type the IP address into a web browser) and then click on Scan, New Registration and then SMB.
Name: This will be the name of the one touch button on the machine
Destination: IP or DNS Name of the PC that holds the scanned folder
Folder: The share name that you gave the folder on the PC
Username: Username for the machine to authenticate with the PC
Password: Password associated with the username on the PC.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.