PDA

View Full Version : C652- black toner supply duct (part)?


Custom Search


Toxic
02-28-2012, 03:52 PM
Hello,

I have machine bizhub c652 with broken shutter on toner supply duct on developing unit k.
I manage to improvise this but it is not reliably solution especially since the machine is 200km far away and cant afford to get in situation that machine stops because this.
I try find this part in parts manual but no success.
Does this part comes with developing unit or with drum unit?

Thanks in advance

http://s6.postimage.org/ritt4xfh9/duct.jpg (http://postimage.org/image/ritt4xfh9/)

Avskrap
02-28-2012, 03:55 PM
It comes with the developing unit IIRC.

Toxic
02-28-2012, 05:43 PM
Thanks for answering.
Are you sure this part comes with new developing unit because i changed developing unit 6 months ago and i dont remember that this part was in the box with developing unit (i am sure it is not factory installed on developing unit when unpack from protective material)?
In that time this part was already broken and i will be replace it if i have it in that moment.
Maybe i am wrong because i cant remember every details on some machine i have worked in past but i am pretty sure it was not with developing unit in box.
Also in service manual it says "remove toner supply duct" and after installing new developing it says " mount toner supply duct removed in step 4 to the new developing unit".
Hmm,i will try find old developing unit to check is this duct in the box.

DCPS
02-29-2012, 11:44 AM
14642

Toxic
02-29-2012, 01:22 PM
Thanks a lot!
Saved me. :)

Custom Search