PDA

View Full Version : Panasonic Dp-190 Error E01-22


Custom Search


rubenc79
11-15-2007, 05:55 PM
Does Anyone Tell Me What Is This Error Or Where Could I Get The Service Manual

mikeezoz
11-15-2007, 08:30 PM
1. Polygon Motor connector is disconnected.
2. SPC PCB connector is disconnected.
3. Polygon Motor is defective.
4. LVPS is defective.
5. DRV PCB is defective.or is disconnected.
3. Polygon Motor is defective.
4. LVPS is defective.
5. DRV PCB is defective.

mikeezoz
11-15-2007, 08:36 PM
. Polygon Motor connector is disconnected.
2. SPC PCB connector is disconnected.
3. Polygon Motor is defective.
4. LVPS is defective.
5. DRV PCB is defective. PCB connector is disconnected.
3. Polygon M1otor is defective.
4. LVPS is defective.
5. DRV PCB is defective.[/quote]

mikeezoz
11-15-2007, 08:36 PM
1. Polygon Motor connector is disconnected.
2. SPC PCB connector is disconnected.
3. Polygon Motor is defective.
4. LVPS is defective.
5. DRV PCB is defective.

yakyitz
11-28-2007, 12:25 AM
polygon motor synchronization error
1 - possible causes are
2 - engine pcb
3 - laser unit
4 - lvps
5 - sc pcb
I would reseat all the connectors before starting to replace boards

Custom Search