Panasonic Dp-190 Error E01-22

[rubenc79]

Does Anyone Tell Me What Is This Error Or Where Could I Get The Service Manual

[mikeezoz]

1. Polygon Motor connector is disconnected.
2. SPC PCB connector is disconnected.
3. Polygon Motor is defective.
4. LVPS is defective.
5. DRV PCB is defective.or is disconnected.
3. Polygon Motor is defective.
4. LVPS is defective.
5. DRV PCB is defective.

[mikeezoz]

. Polygon Motor connector is disconnected.
2. SPC PCB connector is disconnected.
3. Polygon Motor is defective.
4. LVPS is defective.
5. DRV PCB is defective. PCB connector is disconnected.
3. Polygon M1otor is defective.
4. LVPS is defective.
5. DRV PCB is defective.[/quote]

[mikeezoz]

1. Polygon Motor connector is disconnected.
2. SPC PCB connector is disconnected.
3. Polygon Motor is defective.
4. LVPS is defective.
5. DRV PCB is defective.

[yakyitz]

polygon motor synchronization error
1 - possible causes are
2 - engine pcb
3 - laser unit
4 - lvps
5 - sc pcb
I would reseat all the connectors before starting to replace boards