Makyde
03-09-2012, 09:57 AM
Please can anyone assist regarding the cyan imaging units loosing developer and therefore the life span is very short. The supply of cyan imaging units from Japan had a number of bad batches or should we say factory faults in the past months but we have been told the issues was resolved and the recent supplies were all okay but we have a number of the models discussed here where the failure rate is high and the prints exiting the machines have blue (cyan) lines, especially on the edges of the paper.
Any advice or assistance would be appreciate regarding this matter please.
Thanks. Mark
Any advice or assistance would be appreciate regarding this matter please.
Thanks. Mark