C6500 DIPSW Settings ??? [Archive]

gully

11-17-2007, 12:27 AM

Has anyone got a list of what all the dipsw do? as the one i have is full of empty spaces..

redline

11-17-2007, 02:49 AM

Has anyone got a list of what all the dipsw do? as the one i have is full of empty spaces..
do you have a pdf of the manual and that has the blank spots

gully

11-17-2007, 06:52 PM

do you have a pdf of the manual and that has the blank spots
Yep, thats the one. You haven't got an updated one by any chance?

redline

11-18-2007, 05:15 AM

Ionly have the same one you can down load from the web site or got on course

pepper38_cnd

11-18-2007, 03:11 PM

I have downloaded the latest SM dated 2007 /06 Ver 2.0 I don't think it is any different from what you are looking at. There are many blank spots and many where even tho there is no description the switch setting are in Red meaning do not change! I would not recommend experimenting with any undrescribed switch settings.

Is there something in particular you are looking to change?

gully

11-18-2007, 04:53 PM

I have downloaded the latest SM dated 2007 /06 Ver 2.0 I don't think it is any different from what you are looking at. There are many blank spots and many where even tho there is no description the switch setting are in Red meaning do not change! I would not recommend experimenting with any undrescribed switch settings.

Is there something in particular you are looking to change?

In some information i recieved for greys not being correct, its been sugested to change dipsw 12-4 to 1 and 12-5 to 0 but i have no description of what they are, where did you download the latest one from? the one i have is 2006.09 ver 1.0

pepper38_cnd

11-18-2007, 07:43 PM

There is no discription for those sw's in this manual either but that is the solution posted on the KM SSD site

gully

11-18-2007, 09:31 PM

There is no discription for those sw's in this manual either but that is the solution posted on the KM SSD site

Is it possible to post all the solutions on this site? maybe in one big-ish pdf

pepper38_cnd

11-23-2007, 01:29 AM

Check your PM's :)

Itsthepaper

12-27-2007, 02:57 AM

When upgrading firmware Dipsw setting are changed or get added. Review the firmware readme files and you"ll see the list of added or changed switches. Especially version 30 firmware has alot of new switches. Check it out