PDA

View Full Version : Miscellaneous Power on the Controller error


Custom Search


l-dog63
03-16-2012, 03:47 PM
I have a Bizhub C452 with an IC-409 Fiery. whenever printing anything above a couple of pages I get the 'Power on the Controller" display on the copier and the Fiery reset as if nothing was sent to it.

MCBIG
03-16-2012, 04:16 PM
If I ran into this issue myself, I would probably start by reloading the Fiery System code....

emujo
03-16-2012, 04:18 PM
Re-seat the video card, set the Fiery back to factory spec, re-do the install for the Fiery again. There are specifics instructions depending on if you are using the emperon controller for other than printing...You may also want to ensure you are using the correct Fiery driver for printing. Emujo

Custom Search