PDA

View Full Version : bizhub c203 cd password


Custom Search


Haarlem
03-27-2012, 06:56 AM
Somewhere along the lines a tech has changed the pass and no kept a log of it so we can't access Tech Mode.

stop 0 0 stop 0 1 brings up the prompt for input password
92729272
00000000
12345678

none of these work.

Booting the machine in trouble reset then doing stop 0 0 stop 0 1 still brings up password prompt and doesn't take me directly into tech mode.

Any ideas?
reason for wantnig to get in is so i can reset ADMIN pass (12345678, 00000000) has been changed aswell.

thankx

RRodgers
03-27-2012, 02:41 PM
Somewhere along the lines a tech has changed the pass and no kept a log of it so we can't access Tech Mode.

stop 0 0 stop 0 1 brings up the prompt for input password
92729272
00000000
12345678

none of these work.

Booting the machine in trouble reset then doing stop 0 0 stop 0 1 still brings up password prompt and doesn't take me directly into tech mode.

Any ideas?
reason for wantnig to get in is so i can reset ADMIN pass (12345678, 00000000) has been changed aswell.

thankx

Sounds like you are going to have to send the board into Konica.

morpk
03-29-2012, 12:04 AM
Hi, i'm sure that the password is stored in the NVRAM meaning only Konica Minolta would be able to clear it, you were on the right path but if you can't get into service mode then your stuffed.

Custom Search