PDA

View Full Version : KonicaMinolta 7022 - no function


Custom Search


fgret
11-21-2007, 11:22 AM
Hello there,

since yesterday i have an used 7022 - everything worked very fine ( just 40.000 copies ). But since today i can't start the machine.
The display comes for about 1 second. After that the machine retries to start again. ( and on and on and on ).
I disconnected power for more than 1 hour - but nothing changed.

Has anyone an idea ?

Please help

Frank

Luther
11-21-2007, 04:32 PM
Make sure the right side door is closed,(the duplex door) check the interlock, hope this helps

fgret
11-21-2007, 05:07 PM
:confused: Everything was ok. But still isn't working.

pepper38_cnd
11-21-2007, 10:09 PM
Sounds like a bad power supply I have seen that exact thing on a 7145 and changing the power supply solved it. that is also the solution on the KM ssd site. See Attached

random
11-22-2007, 05:31 AM
I have had similar 7145 and it was the fan! on the power supply. No error code just wasn't spinning and the machine sensed this.

pepper38_cnd
11-23-2007, 02:03 AM
Thanks Random, I just swapped the whole thing, ( Always in a hurry) I'll have to revisit, those power supplies and see if I can just change the fan and put them back into used parts inventory.

Custom Search