PDA

View Full Version : C252 duplex printing


Custom Search


paulrid
04-03-2012, 12:29 PM
Hi guys,

I have a C252 machine I'm setting up but I have a problem with duplex printing. I have adjusted the machine so when it scans simplex it prints the output in the same position but when I change it to duplex it prints the first scan i.e the simplex side in the wrong position both leading edge and side edge. I have checked the position on the glass during the scan and its in the correct place. I have looked through as many setting and I can see but I can't seem to find what's wrong, I have also looked in the service manual but I am still none the wiser, any ideas?

Thanks Paul.

aligis
04-03-2012, 01:59 PM
try to select box ** booklet ** second to general Tab good luck

Custom Search