FINECO
11-21-2007, 11:44 PM
OK at least now I have an error I ca ask about
HELP!!!!!!!!!!!!!!!!!!!!!
AusiTech
11-22-2007, 08:52 AM
OK at least now I have an error I ca ask about
HELP!!!!!!!!!!!!!!!!!!!!!
i have had this a few times, for me it was either the transfer belt all waxed up (polish with little water+toner will clean it off, or replace) or the devs are no good... had 2 now that dev's from factory are faulty. Oh yeah and pull out the sensor board and clean the boards on the back.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.