PDA

View Full Version : konica 8050 SC45-20


Custom Search


FINECO
11-21-2007, 11:44 PM
OK at least now I have an error I ca ask about

HELP!!!!!!!!!!!!!!!!!!!!!

AusiTech
11-22-2007, 08:52 AM
OK at least now I have an error I ca ask about

HELP!!!!!!!!!!!!!!!!!!!!!


i have had this a few times, for me it was either the transfer belt all waxed up (polish with little water+toner will clean it off, or replace) or the devs are no good... had 2 now that dev's from factory are faulty. Oh yeah and pull out the sensor board and clean the boards on the back.

Custom Search