PDA

View Full Version : How do I remove the transfer belt on our Bizhub C650?


Custom Search


keystonenew
04-10-2012, 01:00 AM
Just got a new belt & lowered the side door, took out the fuser unit. So now how do I get
the belt out? Thanks...

JustManuals
04-10-2012, 04:05 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

ineo+6501
04-10-2012, 09:13 AM
Best thing to do is call a tech.

You do not need to take the fuser out to remove the belt.

habik
04-10-2012, 02:44 PM
Just got a new belt & lowered the side door, took out the fuser unit. So now how do I get
the belt out? Thanks...


You will find it in manual. If you haven't got one. Contact Paul above. Trust me. You need manual to maintain this machine. Even if it is for silly bits like transfer belt removal. Incorrect removal usually causes deep ridges in transfer belt.

I'll give you hint . 4 screws out and 1 to screw in :)

Custom Search