PDA

View Full Version : C652 No drum reset


Custom Search


suomi
04-10-2012, 08:34 AM
2 New black drum unit tested & no reset drum counter!!!

JustManuals
04-10-2012, 09:54 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

EarthKmTech
04-10-2012, 08:20 PM
Make sure the pins arent bent on the dv unit that contact the drum chip.

Had this happen before when inexperienced tech replaced drum cart in a ham fisted manner :cool:

Gaffers01
04-11-2012, 09:44 AM
Check that there are no "P" codes up, as I think if there is the drum will not reset.

emujo
04-12-2012, 03:06 PM
Most likely you have not followed the instructions properly...the front door must be open when you do the reset. Emujo

suomi
04-13-2012, 07:42 AM
yes if you change fusing unit or transfer belt. But NOT drum...

EarthKmTech
04-13-2012, 07:43 AM
Ahh, that proceedure is for the belt and fusing unit. The drum is provided with a "new article detection device"

stefanv
05-07-2012, 03:22 PM
Had same problem!!!! Check cn32 on PRCB for proper connection....

suomi
05-08-2012, 11:07 AM
did not help but still running. B IU counter is over 11000...

Custom Search