PDA

View Full Version : bizhub c252 c-fe07


Custom Search


alsi5
04-17-2012, 08:51 PM
Hi, i've recently had an issue with bizhub c252. Sometimes when i turn on the machine i've get error code c-fe07 and only reboot helps. What this error means?

Regards
alsi5

JustManuals
04-17-2012, 09:08 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

SmellsHot
04-18-2012, 01:17 PM
CFE07 ASIC10 Timeout Number of DMA under operation and
transfer completion line

Problematic parts: MFP Control Board
(PWB-MFP)

If it persists swap out the MFP board

alsi5
04-18-2012, 03:32 PM
There is no different solution? MFP may cost a little much...

Albonline
04-18-2012, 04:38 PM
There is no different solution? MFP may cost a little much...

try reflashing to the latest firmware levels . there was a problem with early fw

alsi5
04-19-2012, 07:37 PM
Reflashing firmware didn't help. I've done it earlier...

Custom Search