PDA

View Full Version : Bizhub 950


Custom Search


Chameleon
04-25-2012, 01:30 PM
I have one with the FS-611 finisher where the corner staple is off. It is very low, about 3/4 of an inch from the top. From the side it is fine and double staple is fine, just the corner staple is too far down. I can't find any adjustments in the book and I thought I'd ask here before I just start messing with screws in the finisher.
Thanks!

JustManuals
04-25-2012, 05:30 PM
FS-611 Finisher Service manual is included in the Bizhub Pro 950 Theory of Operation Service Manual.

http://www.justmanuals.com/konica-minolta-bizhub-theory-operation-service-manual-p-526.html

$12,77 and instant download.

Paul@justmanuals.com

Chameleon
04-25-2012, 08:34 PM
I can't find any adjustments in the book

Thanks anyway Paul, but I already have the manuals.

blaze2000
04-26-2012, 02:58 AM
I have seen the actual stapler body come away from it's proper position and still operate with no errors. I would check and verify the stpaler is in its guides

minimerlin
04-26-2012, 10:11 AM
Have a look to see if there is anything stopping the stapler heads actually getting to the correct position...like a harness wrongly routed or gear tooth missing, I have had both!

Custom Search