PDA

View Full Version : KM C352...


Custom Search


nelsmy
11-27-2007, 03:56 PM
Does anyone have experience on Konica Minolta C352 that the toner smear around those font or artwork?

2nd, I have KM C352 + IC-406, I have calibrate with EFI ES-1000, but when print out some artwork with gradation, it was too obviously and the quality is worst than those low end copier or color laser printer, any idea for it?

3rd, why my C352 print out those small text it was not clear as the C352 brochure state with Simitri Toner, tiny text will clear and razor...

Can anyone give me a hand on what is happen with my copier?

You reply and help is very appreciate.

random
11-27-2007, 06:35 PM
2nd - is the fiery edge enhancement on or off?

nelsmy
11-27-2007, 06:43 PM
If i on the edge enhancement it come out more worst, because when we using simulation press color like yellow, it always has e.g 5% magenta mix with it, so when if on the edge enhancement, the yellow will have a box with magenta color.

RockETop
11-28-2007, 02:06 AM
The ES-1000 is overkill for calibration on these machines in my opinion. Calibrate using ColorCal.

nelsmy
11-28-2007, 10:51 PM
Before i get my ES-1000, i did use ColorCal to do calibration, but because of the quality not reach to me expectation, therefore, i buy an ES-1000 for do the calibration testing.

Custom Search