PDA

View Full Version : colour problem in c-450 hurried!!!


Custom Search


gang1110
04-30-2012, 09:05 PM
i'm upload 2 file one is the source file and the other is the result the test colour in the machine is ok if someone have an idea? look at background

in the original file is grey and i got from the machine yellow backgrond . i make gradiation and calibration nothing happend 1568815687

Spidula
05-01-2012, 06:23 PM
Looks like you have a sepia lens on your camera!

JustManuals
05-01-2012, 10:22 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

http://www.justmanuals.com (http://www.justmanuals.com/)

Paul@justmanuals.com (Paul@justmanuals.com)

habik
05-02-2012, 02:13 AM
Clean Front and Rear Color Pattern Reg. Sensors and also make sure your Transfer belt is clean. Than do Initialize and Stibilise Background in Service Mode. Then Gradation Adjust.

or

You may have Yellow IU shot.

Check the CMYK Gradation Test Print First to see how the IU are behaving.


Good Luck.

jokacross
05-02-2012, 12:08 PM
please make a scanner of the printed page, not a photography of the printing because in that image we cant see the actual problem

gang1110
05-04-2012, 05:50 PM
ok thanks for everybody

Custom Search