Konica c352 tray selection

[Lasersupplies]

I was wondering if anyone knew if it was possible to set tray3 (pc-103) on the Konica C352 to thick 2 or 3? I am trying to put card through the machine but everytime tray 1 is used (new rollers and set to thick 3) it jams every 5/6 pages. All pages go through bypass ok but i have to refill every 5 minutes as it does not hold enough card. If anyone knows if i can do this i would be very much appreciate it.

Many Thanks guys.

[acusso1234]

I believe that only bypass and upper cassette can be enabled to use differents ticks on that model..Try changing the orientation of the card to make it longer, if you can..

[blackcat4866]

Just out of curiosity, is this cardstock within machine specs? If you don't know or don't have good specs on the paper see here:

http://www.copytechnet.com/forums/rants-raves-everything-else/58253-can-i-use-paper.html

=^..^=

[TheOwl]

Get someone in to fix Tray 1.

You can't set lower drawers (Tray 2, 3 and 4) to use thicker paper.