PDA

View Full Version : Konica Minolta C552 dot lines on image


Custom Search


huney
05-22-2012, 03:41 PM
Hello guys

Urgent help please, image problem as attached on copy and print output

Zeldaman
05-22-2012, 04:42 PM
Hi there!
Look´s for me that is a laser-problem (dirt or defect) or the MFP-boards gone.
Greetings...

mo0651
05-22-2012, 05:37 PM
Looks like Laser. Does it happen on single color copies?

Albonline
05-22-2012, 07:26 PM
One word RAM

huney
05-26-2012, 10:06 AM
yes it appears on single color also.


Albonline can you explain more please? are you sure?

EarthKmTech
05-26-2012, 12:59 PM
Order the mfp board + ram module (its usually the soldered down ram on the mfp board that fails, not the module so mfp board replacement is usually required)

Try the ram first, if no good, replace mfp + ram.

Am i sure? Im fkn certain.

huney
05-26-2012, 03:53 PM
Order the mfp board + ram module (its usually the soldered down ram on the mfp board that fails, not the module so mfp board replacement is usually required)

Try the ram first, if no good, replace mfp + ram.

Am i sure? Im fkn certain.

i try the RAM and still the same problem, i don't have mfp board in stock. do you have any idea about mfp board price?

EarthKmTech
05-27-2012, 05:52 AM
i try the RAM and still the same problem, i don't have mfp board in stock. do you have any idea about mfp board price?

figured as much, im yet to see that issue caused by the ram module, but its always cheaper to try first ;)

MFP board is F-ing expensive, but its what you need im affraid.

Loading the firmware will also be required (ive always done this so i dont know if there is anything on the board from the factory - i would assume not)

last i saw they retail between 2 - 3K

you may be able to get it cheaper though...

Custom Search