It's been about 10 years since I worked on duplicators. Mostly Riso. Does anyone have info on this duplicator. Took a trade in and want to test it. Has user access codes enabled and need to know if theres a master code or how to reset this code? Any help would be appreciated. Even a manual.
-
My mission here on Earth is to help all you Dum-Dums! -
Ricoh JP1230 user codes
To enter the service mode press CLEAR MODES then 107 then press and hold down the red CLEAR/STOP key.
Enter 120 press enter then change value from 1 to 0.
Will be glad to help if you need any other assistance -
Thanks yakyitz. Got in to test machine.My mission here on Earth is to help all you Dum-Dums!Comment
-
Im getting the e-21 error on this JP1230 (Gestetner 5308L) the service manual says its the paper exit sensor but I cannot locate the part number on the book? any ideas??Comment
Comment