PDA

View Full Version : Jamming konica 1050e hv separation charger problem


Custom Search


copycorner
05-25-2012, 10:49 PM
When starting the hv auto adjust the machine will only get to 3/8. The paper is rolled up going into the fuser assembly. Any suggestions?

Just found a ground wire came loose from the HV power supply. Reconnected and now the HV auto adjust runs through 4/8 but at least the paper stopped jamming at the fuser roller entrance. Still can't get 8/8 out of the High Voltage Auto Adjust procedure. Any suggestions?

Custom Search