PDA

View Full Version : CQ MPC 2550


Custom Search


brunot
05-31-2012, 11:22 PM
A message remains displayed on the screen : "independent-supplier toner cartridge is set"

JustManuals
06-01-2012, 02:38 AM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

jonezy999
06-01-2012, 03:05 AM
Seek and ye shall find.

sakura
06-01-2012, 05:17 AM
Ask your customers DO NOT take toner bottles out - shake it - and put it back in. and you will never have this message again.
Seriously, you have to know how to go into SP mode to turn off toner level recognition then turn machine off and install a new toner bottle with "fresh" chip on it then you can go back into that SP mode and turn low toner level recognition ON again.

luke001
06-01-2012, 06:58 AM
Set SP 5051 to 1 (off)

sakura
06-01-2012, 07:30 AM
As mentioned before - do not forget to turn it back ON after you will install a new genuine toner bottle so it will start monitoring toner level as usual... unless you want to turn it off once and for all :)

Custom Search