BHC350 transfer roller replacement indicator

[krm]

I have a customer paying for a fuser and transfer roller unit is about to call as well. Can this one just be reset to save them some $? Copy quality is good. Anybody know where I can get a reasonably priced fuser?
Thanks.

[JSC]

You can just clear the Transfer roller count in sercvice mode.

[asrar]

You can just clear the Transfer roller count in sercvice mode.



replace fuse with 80 ma

[krm]

Thanks, I thought you could, but wanted to make sure to save a trip. Thanks for the fuse idea, but the fuser rollers are wearing out/coating is peeling.

[TheOwl]

I don't think we have ever replaced a transfer roller in one of those unless they have been physically damaged.

Asrar - I think you might be thinking of the transfer belt which does require a fuse for reset.

[asrar]

I don't think we have ever replaced a transfer roller in one of those unless they have been physically damaged.

Asrar - I think you might be thinking of the transfer belt which does require a fuse for reset.

ya