View Full Version : Konica bizhub c350 administrator code reset
dmzfmz
12-05-2007, 11:55 PM
Got a used bizhub c350 --works great except can not figure out
how to clear the UNKNOWN Old administrator 8 digit code....
STILL ON IT...
Low mileage on this baby --service manual--says do memory reset...
need code to do it..I think:mad:
...any help appreciated...
frank.tw
12-09-2007, 09:14 AM
in service mode
you can change the administrator code ...if i'm not forget
dmzfmz
12-09-2007, 11:51 PM
Thanks for the help frank.tw but fortunately
got the administrator code...& tech rep code for this puppy...
...don't leave home without it..:cool: One way to solve a problem.
ToshibaTech
12-22-2007, 09:45 PM
I -think- you can bypass the tech rep log in by stop-0-stop-3. Try it when you get to where you put in the tech rep password. Then stop-9 gets you into security mode.
ifback
11-28-2011, 07:13 AM
I -think- you can bypass the tech rep log in by stop-0-stop-3. Try it when you get to where you put in the tech rep password. Then stop-9 gets you into security mode.
thank and more ideas:o
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.