View Full Version : Error Code Konica 7115
Lukegw
06-13-2012, 08:49 AM
Konica 7115 displaying error code C0500, I am not familiar with Konica please help
SmellsHot
06-13-2012, 12:44 PM
fuser error. Hold down stop button while powering on machine. If it goes away great....if not replace fuser
JustManuals
06-13-2012, 06:33 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Max Kilby
06-14-2012, 04:08 AM
The manual says:
C0500 Warm-up failure • It takes the surface temperature of the Left FusingRoller more than 35 sec. to reach 100 °C since thestart of a warm-up cycle.• It takes the surface temperature of the Left FusingRoller more than 25 sec. to reach 140 °C after it hasreached 100 °C.• It takes more than 20 sec. for the warm-up cycle to becompleted after the surface temperature of the LeftFusing Roller has reached 140 °C.
Easy to access fuser and all bits so you should be able to figure it out if you have half an idea about fusers
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.