View Full Version : Miscellaneous Bizhub 283 Start button continuously blinks Orange Not Blue after turn on
gonay
06-26-2012, 04:40 AM
Help Bizhub 283 Start button continuously blinks Orange Not Blue after turning on the machine.
The PRCB board has been replaced. Any Suggestion what cause it? because it has no error code and all function are fine except the start button so we can not copy or print the test page.
KM7155
06-26-2012, 01:20 PM
Help Bizhub 283 Start button continuously blinks Orange Not Blue after turning on the machine.
The PRCB board has been replaced. Any Suggestion what cause it? because it has no error code and all function are fine except the start button so we can not copy or print the test page.
is this machine came with the mechanical meter? is yes, u can check the connection.
for my case, is a B350, the mechanical meter connection open, the start button is blinking
and the screen showing "Ready to Copy", but not printing or copying.
SmellsHot
06-26-2012, 05:17 PM
Some type of authentication device is enabled.....check that in security mode
JustManuals
06-26-2012, 11:21 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
gonay
06-27-2012, 03:24 AM
is this machine came with the mechanical meter? is yes, u can check the connection.
for my case, is a B350, the mechanical meter connection open, the start button is blinking
and the screen showing "Ready to Copy", but not printing or copying.
Thank's for your very good solution. problem has been solved now.
KM7155
06-30-2012, 03:51 PM
Thank's for your very good solution. problem has been solved now.
Thats good, u are most welcome.
aleksander
07-01-2012, 12:26 PM
1. Check the mechanical counter.
2. Try to rewrite or upgrade the firmware.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.