PDA

View Full Version : bizhub c10


Custom Search


montana
06-28-2012, 12:37 AM
hi...i have problem with konica minolta bizhub c10 which giving me message when i power on the machine to enter the settings of the fax..then displaying "USA?select=OK"and stay there ...all the buttons of the control panel don't work
i hear the sound of peeps but nothing changed....any solution guys?:cool:

JustManuals
06-28-2012, 06:17 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Toxic
06-29-2012, 01:54 PM
I have similar problem recently but in my case machine was starting and after some time just stuck with message "please wait" and no response after pressing anything on control panel..
Problem solved with scanner lamp replacement.
Lamp was giving some strange purple color of light instead white like should and CCD does not read valid signal and starting of machine stuck there.
Check this and try put new firmware.

Custom Search