PDA

View Full Version : HP4200 error 49


Custom Search


hawkfan12
08-07-2005, 10:34 AM
What\'s an error49 on a HP-4200? any tips? :blush:

raym
08-11-2005, 04:43 PM
it points to a very vague \"internal printer error\". don\'t ya just love it? my manual says it indicates an invalid command or data was sent to formatter causing processor to stop. says to verify all cables are connected, turn ptr. off then on to reset, cancel all print jobs and then resend. try to isolate any offending print job. also says if formatter pan assy. or dc controller was removed, make sure rib. cable between dc cont. and the interconnect pcb is connected.

good luck and hope this helps,
ray

Lance
08-11-2005, 09:35 PM
hawkfan12 wrote:

What\'s an error49 on a HP-4200? any tips? :blush:

That\'s on of the few manuals I don\'t have for HP\'s. I would agree with Raym, reseat everything and try to figure out if it\'s a spicific print job that is killing it.

Good luck!

Custom Search